Designer's Plan Information

Scale: 1/4" = 1'-0"

Elevations -
Scale, heights, and roof slope.

Foundation Plan -
Footing details and wall thickness.

Dimensioned Floor Plans -
Room labels and sizes; ceiling heights if different than standard room heights.

Framing Details -
Plate heights and wall sections included.

Roof Plan -
Scale, beam locations and orientation. Roof plan is stick-built only, but truss plans can be drawn by builder's lumber suppliers at no charge. Snow loads are also included.

Cross Section -
Multiple building sections are provided.

Electrical Layout -
Switches, circuits, smoke detectors, wall and floor fixtures, fans/lights, and recessed/can lighting.

Cabinet Elevations -
Basic cabinet configuration is shown for the general kitchen layout.

Window and Door Schedule -
Nominal window/door sizes and operation are shown on the floor plans at the location of each window/door, and also sometimes shown on a schedule.

IRC Details - In most cases, the code-related notes, details, and specifications will be compliant to the current IRC code. In cases where the IRC code information is not yet updated, contact the designer for further guidance; an update to the latest code information is often a simple matter. Structurally, parts of the design are prescriptively designed.

CAD Software: Revit

These items are NOT included and can be handled locally if required:
  • Architectural or Engineering Stamp
  • Site Plan
  • HVAC or Mechanical Drawings
  • Plumbing Drawings
  • Energy Calculations
Therma Tru Doors For House Plans Online